Adalm2000

MCP server for ADALM2000 (M2k) — AWG, scope, and PSU control via FastMCP 3.4.

Tools

Tool	Operations
adalm_device	list, connect, disconnect, status, check
adalm_awg	configure, start, stop, status
adalm_scope	capture, fft, measure
adalm_psu	set, get, enable, disable, status

Usage

uvx adalm2000-mcp serve

opencode config

{
  "mcp": {
    "adalm2000-mcp": {
      "type": "local",
      "command": ["uvx", "adalm2000-mcp", "serve"]
    }
  }
}

Generate a signal

// Connect W1 to 1+ with a wire, then:
adalm_awg(operation="configure", channel=1, waveform="sine", frequency=1000, amplitude=1.0)
adalm_awg(operation="start", channel=1)
adalm_scope(operation="capture", channel=1, sample_count=4096)

Backends

• IIO backend — real hardware via libiio (iio_readdev/iio_writedev)
• Mock backend — no hardware needed, generates synthetic waveforms

ADALM_MCP_MOCK=force to force mock mode.

Wiring

AWG output	Scope input
W1 (pin 1)	1+ (pin 1)
W2 (pin 2)	2+ (pin 2)
GND	GND

Publish

git tag v0.2.0
git push --tags

GitHub Actions publishes to PyPI automatically.