Ffl

MCP server for ffl. Let AI share anything for you.

Backed by ffl, which turns any file/folder into an HTTPS link.

This is a minimal MCP server that shells out to ffl / ffl.com locally. No file contents are sent to the LLM; the model only triggers local ffl.

This demo shows collaborative debugging: Claude on the left shares a local environment (DB + logs) via P2P link, Claude on the right downloads and diagnoses the error. In this scenario, the two Claudes represent different people working on separate machines.

---

Table of Contents

• Installation
  • Windows — GUI Installer
  • Linux / macOS — one-liner
  • Windows — one-liner (PowerShell)
  • uvx (no binary, requires uv)
  • Run directly (development)
• MCP Config (manual JSON)
• Tools
  • Sharing
  • Downloading
  • Keygen
  • Session Management
• Notes
• Testing
• WSL2 Users

---

Installation

⚡ Short URLs for convenience

• Linux/macOS: curl -fsSL https://fastfilelink.com/mcp/install.sh | bash
• Windows (script): iwr -useb https://fastfilelink.com/mcp/install.ps1 | iex

🔒 fastfilelink.com/mcp/* is a redirect to GitHub. Use the direct GitHub URLs below if you prefer.

Windows — GUI Installer

Download and run ffl-mcp-setup.exe from the latest release.

No command line needed — the installer registers ffl-mcp with Claude Desktop and Claude Code automatically.

Linux / macOS — one-liner

curl -fsSL https://raw.githubusercontent.com/nuwainfo/ffl-mcp/refs/heads/main/install.sh | bash

Downloads the platform binary from the latest GitHub release and runs ffl-mcp install to register with Claude. Falls back to uvx automatically if no binary is available for your platform.

Windows — one-liner (PowerShell)

iwr -useb https://raw.githubusercontent.com/nuwainfo/ffl-mcp/refs/heads/main/install.ps1 | iex

Downloads ffl-mcp.exe from the latest GitHub release and registers it with Claude.

uvx (no binary, requires uv)

uvx --from git+https://github.com/nuwainfo/ffl-mcp install

Targets can be controlled with --target (default: all):

uvx --from git+https://github.com/nuwainfo/ffl-mcp install --target claude-desktop,codex-desktop,codex-cli

uvx --from git+https://github.com/nuwainfo/ffl-mcp install --print

If Claude Code CLI is installed, the installer also runs claude mcp add automatically (user scope). The installer also writes Codex MCP config to ~/.codex/config.toml for Codex Desktop/CLI/IDE. If Codex CLI is installed, the installer also runs codex mcp add automatically. For custom config paths, pass the file:

uvx --from git+https://github.com/nuwainfo/ffl-mcp install --config /path/to/claude_desktop_config.json
uvx --from git+https://github.com/nuwainfo/ffl-mcp install --codex-config /path/to/codex/config.toml

Run directly (development)

Prereq: uv installed.

# optional: override embedded ffl.com (APE) or use "ffl" on PATH
export FFL_BIN="$HOME/bin/ffl.com"
chmod +x "$FFL_BIN"

# optional safety: restrict file sharing to a directory
export ALLOWED_BASE_DIR="$HOME/Downloads"

# optional: use stdin for text/base64 instead of temp files
export FFL_USE_STDIN=1

uvx --from git+https://github.com/nuwainfo/ffl-mcp ffl-mcp

---

MCP Config (manual JSON)

{
  "mcpServers": {
    "ffl": {
      "command": "uvx",
      "args": ["--from", "git+https://github.com/nuwainfo/ffl-mcp", "ffl-mcp"],
      "env": {
        "ALLOWED_BASE_DIR": "/Users/you/Downloads",
        "FFL_USE_STDIN": "1"
      }
    }
  }
}

---

Tools

Sharing

Tool	Input
fflShareText(text, name?, ...)	Plain text
fflShareBase64(dataB64, name?, ...)	Binary data (base64-encoded)
fflShareFile(path, name?, ...)	Single local file or folder
fflShareFiles(paths, name?, ...)	Multiple files (ffl auto-zips them into one download)

Common options for all share tools:

Option	Default	Description
e2ee	False	End-to-end encryption
qrInTerminal	False	Return ASCII QR art (qrCode in response)
authUser / authPassword	—	HTTP Basic Auth to protect the link
maxDownloads	1	Stop serving after N downloads (P2P only)
timeoutSeconds	1800	Inactivity timeout in seconds (P2P only)
recipientAuth	—	pickup (6-digit code), pubkey (RSA), pubkey+pickup, or email (OTP)
pickupCode	auto	Specific pickup code for pickup mode
recipientPublicKey	—	Path to .fflpub file for pubkey mode
recipientEmail	—	Email(s) for email OTP mode, comma-separated
alias	—	Custom link alias e.g. my-release (requires Standard+ account)
receipt	—	Email notification when recipient downloads
receiptConfirm	—	Require recipient confirmation before download; pass a message or ""
forceRelay	False	Disable WebRTC, route all traffic through tunnel
port	—	Local HTTP server port (auto-detect by default). Useful with fixed tunnels.
invite	False	Open the ffl invite page in a local browser with the generated sharing link.
enableReporting	False	Enable ffl diagnostic error reporting. Disabled by default.
upload	—	Upload to FFL server instead of P2P — e.g. "1 day", "6 hours" (requires Standard+ account)
resumeUpload	False	Resume an interrupted upload
proxy	—	Proxy URL e.g. socks5://127.0.0.1:9050

Additional options for fflShareFile / fflShareFiles:

Option	Default	Description
preview	False	Enable preview sidecar routes for folder or multi-file shares. Returned links stay clean; add ?preview=true manually when you want the browser preview view.
exclude	—	Glob or regex patterns to exclude, comma-separated — e.g. *.pyc,__pycache__ or re:\.env$
pause	—	Pause server upload at a percentage from 1 to 99. Requires upload.
vfs	False	Expose as VFS server (vfs:// URI) — fflShareFile only
preferredTunnel	—	Set preferred tunnel for this and future runs — cloudflare, ngrok, bore, etc.

Preview sidecar routes (/manifest, /file, /thumb) are only created for folder shares and multi-file shares. Single-file shares are served as direct file links, even when preview=True. MCP returns the base FastFileLink URL and does not append ?preview=true; users may add that query string manually.

Response fields: sessionId, link, pid, qrCode? (ASCII art when qrInTerminal=True), debugLogPath?

Downloading

fflDownload(url, outputPath?, resume?, authUser?, authPassword?,
            recipientAuth?, pickupCode?, recipientPrivateKey?, proxy?,
            enableReporting?)
  -> {ok, returncode, outputPath?, transferMode?, transferInfo?, message?, ...}

Downloads from FastFileLink URLs (WebRTC P2P when possible, HTTP fallback) or any HTTP(S) URL (works like wget).

transferMode	Meaning
webrtc_p2p	Direct peer-to-peer (fastest)
http_fallback	HTTP relay when WebRTC fails
http_direct	Regular HTTP download (non-FastFileLink URL)

For authenticated links: pass recipientAuth + pickupCode (pickup mode) or recipientPrivateKey (pubkey mode). Set enableReporting=True only when you want to opt into ffl diagnostic error reporting for troubleshooting.

Keygen

fflKeygen(name?) -> {ok, returncode, output}

Generates an RSA keypair for passwordless pubkey recipient auth:

• <name>.fflpub — share with the sender (pass as recipientPublicKey)
• <name>.fflkey — keep private (pass as recipientPrivateKey when downloading)

Session Management

• fflListSessions() — list active share sessions
• fflStopSession(sessionId) — terminate a session
• fflGetSession(sessionId) — get session details
• fflGetSessionEvents(sessionId, limit=50) — retrieve webhook events

---

Notes

• FFL_USE_STDIN=1 avoids writing text/base64 payloads to disk.
• FFL_RUN_MODE=python runs the Core.py CLI (requires FFL_CORE_PATH).
• FFL_USE_HOOK=1 starts a local webhook server and passes it to ffl for real-time link/progress events.
• FFL_DEBUG=1 saves ffl output to a temp log file; path returned as debugLogPath. Set FFL_DEBUG=/path/to/log.txt to use a fixed path.
• ALLOWED_BASE_DIR restricts fflShareFile/fflShareFiles to a specific directory.

---

Testing

# Unit + binary tests (no network needed)
python -m unittest discover -s tests -p "*Test.py" -v

# All tests including share/download round-trips (requires network)
FFL_INTEGRATION_TESTS=1 python -m unittest discover -s tests -p "*Test.py" -v

---

WSL2 Users

If you encounter TLSError([0x6300]) errors, run this command to disable Windows interop for .com files:

sudo sh -c 'echo -1 > /proc/sys/fs/binfmt_misc/WSLInterop'

This allows ffl.com (APE binary) to run natively on Linux instead of being executed through Windows.