Matter Web Controller

A fast REST + MCP API in front of your Matter home.

Overview

Matter Web Controller is the hub of a small Matter home. Schedulers, HomeKit bridges, dashboards, presence sensors, and LLMs all talk to this one service — and none of them have to speak Matter. It runs python-matter-server as a subprocess and holds the WebSocket session; state is cached and event-driven, so a read never blocks on a protocol round-trip.

Several instances federate over the same REST they serve. Register a peer and its devices appear here, with commands forwarded automatically — no embedded code, just HTTP.

It runs as your user. Matter operational traffic is ordinary IPv6 UDP, so there are no raw sockets and no sudo on macOS or most Linux. It is built for home use. It is not hardened for commercial deployment.

How it works

A single key, the X-API-Key header, authenticates every request — and federation between instances. GET /health and GET /version are the only open endpoints. Secrets like a peer's key or a pairing code travel in the JSON body, never the URL.

Devices are addressed by stable hash IDs derived from hardware UniqueID, like dev_a3f7c1b2. Aliases you set with /api/name are display-only and are not accepted as IDs.

Quick start

pip install matter-web-controller

export MATTER_SRV_KEY=$(openssl rand -hex 32)
matter-srv --fabric "My Home"

# In another terminal
curl -H "X-API-Key: $MATTER_SRV_KEY" http://127.0.0.1:8080/api/status

# Pair a device (code from its app, e.g. Aqara Home)
curl -H "X-API-Key: $MATTER_SRV_KEY" -H "Content-Type: application/json" \
  -d '{"code":"2456-515-1552","name":"Living Room"}' \
  http://127.0.0.1:8080/api/register

Requires Python 3.12+. The Matter WebSocket binds to the REST port + 1.

matter-srv flags: --port (8080), --host (127.0.0.1; 0.0.0.0 for LAN), --api-key / $MATTER_SRV_KEY, --fabric, --data-dir / $MATTER_DATA_DIR (caches + fabric storage; absolute path logged at startup), --insecure, --log-level / $MATTER_LOG_LEVEL. A non-loopback bind without a key is refused unless --insecure.

REST API

Errors map cleanly: 404 unknown device, 400 bad params, 401 auth, 405 a POST-only endpoint called with GET, 503 Matter bridge offline, 500 other.

Read (GET)

• /api/status — counts: lights on/off, sensors active, ACs on/off, bridges, total devices, plus devices_online/devices_offline
• /api/devices — raw states for every device, each with an online flag
• /api/identities, /api/identities?id — hardware identity per device (or one): vendor, product/model, node label, hardware/software versions, serial, unique id, and Matter device-type ids. The static counterpart to /api/devices; tells apart bridged children of one hub after a re-pairing, and with ?id decodes a dev_* id back to its node_id/endpoint_id
• /api/lights — normalized brightness 0–1 and Kelvin; brightness is kept even when off, state carries on/off, online reports reachability
• /api/sensors, /api/sensor?id — all sensors, or one
• /api/climate[?id] — temperature (°C) and humidity (%)
• /api/level?id, /api/mired?id — read raw brightness (0–254) or color temperature (mireds)
• /api/metadata — declarative capabilities (plus online), used by federation peers
• /health, /version — unauthenticated

Control (POST)

• /api/set {id, brightness 0–1, temperature Kelvin} — both optional
• /api/toggle {id} — flip on/off; also valid on ACs
• /api/level {id, level 0–254}, /api/mired {id, mireds 153–500} (clamped)
• /api/batch {actions:[…]} — run in parallel

curl -H "X-API-Key: $MATTER_SRV_KEY" -H "Content-Type: application/json" \
  -d '{"id":"dev_e3798593","brightness":0.8,"temperature":2700}' \
  http://127.0.0.1:8080/api/set

AC / Thermostat

• GET /api/acs, GET /api/ac?id — list, or read one

• POST /api/ac {id, on, mode, setpoint °C, fan_speed}

  system_mode: 0 Off, 1 Auto, 3 Cool, 4 Heat, 5 EmergencyHeat, 6 Precooling, 7 FanOnly, 8 Dry, 9 Sleep. on=true resumes the last non-zero mode (default Cool); on=false writes mode 0; mode overrides on (system_mode is a synonym). The setpoint routes to the heating setpoint in Heat/EmergencyHeat or the cooling setpoint in Cool/Precooling; a lone setpoint in Auto is rejected. fan_speed (0–100) applies only to logical-bridge ACs that report it, and is rejected on physical Matter ACs.

Management (POST)

• /api/name {id, name}, /api/name/remove {id, name}
• /api/register {code, name, ip} — commission by pairing code
• /api/unregister {node_id}, /api/refresh

Federation (POST)

• /api/bridge {ip, port, api_key} — register a remote matter-srv (key in body)

• /api/bridge/remove {ip, port}

  Only private/loopback IPs or LAN hostnames are accepted, and self-registration is rejected.

SSE — GET /api/subscribe?id streams occupancy as Server-Sent Events with a : keepalive comment every 15s. For a device on a remote logical bridge, it forwards that bridge's own stream; if the upstream drops, a synthetic occupancy:0 frame lets subscribers fall back to absent.

curl -N -H "X-API-Key: $MATTER_SRV_KEY" \
  "http://127.0.0.1:8080/api/subscribe?id=dev_b503384e"
# data: {"id":"dev_b503384e","occupancy":1,"timestamp":"…"}
# : keepalive   ← every 15s

MCP

matter-mcp is a thin HTTP client over the same REST API — same key, same error model. About 23 tools mirror the endpoints: get_devices, get_identities, get_lights, get_sensors, get_sensor, get_climate, get_status, set_device, toggle, set_level, set_mired, batch_control, set_name, remove_name, add_bridge, remove_bridge, register_device, unregister_node, list_acs, get_ac, set_ac, get_metadata, refresh. The SSE stream is HTTP-only.

Flags: --host (localhost), --port (8080), --api-key, --transport (stdio | sse | http; stdio for local agents), --mcp-host (127.0.0.1), --mcp-port (7861), --log-level.

{
  "mcpServers": {
    "matter": {
      "command": "matter-mcp",
      "args": ["--host", "localhost", "--port", "8080"],
      "env": { "MATTER_SRV_KEY": "your-key-here" }
    }
  }
}

Verified hardware

Verified with the Aqara Hub M200 bridging Aqara sensors over Matter — Motion Sensor P1 (PIR + lux), Presence FP1E (mmWave single-zone), Presence FP2 (mmWave multi-zone, each zone its own dev_* ID), and Presence Multi-Sensor FP300 (mmWave + lux + temp/humidity) — plus the Aqara Climate Sensor W100 paired to an IR AC and bridged as a Matter Thermostat (cluster 0x0201), where writes become IR commands. Sensitivity, hold times, and FP2 zones are configured in the Aqara app, not over Matter, and Aqara does not bridge in-app Scenes. A Matter Rain Sensor (device type 0x0044) surfaces as capability rain.

Limitations

• Only Matter devices already on the LAN. Non-Matter hardware (Casambi, Yeelight, and the like) needs an adapter that exposes this same REST surface.
• BLE commissioning is off by default in python-matter-server builds; devices commission over mDNS.
• One fabric per instance.

Related projects

This service is the hub of a small constellation, all at github.com/dongnh:

• light_programmer — circadian schedule brain with a rain override
• matter-weather-sensor — weather as Matter temp/humidity/pressure/rain/illuminance sensors
• yeelight_webcontrol — Yeelight bulbs on the same REST contract, including on-device colour-flow
• matter-homekit-bridge and matter-homekit-ac — publish Matter devices and AC tiles into Apple Home
• matter-mac-presence, matter-appletv-presence, mac-status-bridge — Macs and Apple TV as occupancy sensors

See CHANGELOG.md for release notes and CLAUDE.md for architecture rules.

License

MIT.