Osc Bridge

Release CI License: GPL-3.0-or-later

Declarative OSC bridge for music hardware and software — and an MCP server to drive it from an LLM.

849 hardware synthesizers over MIDI / SysEx, plus DAWs and live-coding environments over OSC (Ableton, Bitwig, Reaper, Sonic Pi, SuperCollider, Pure Data, TouchDesigner, VCV Rack). Every device gets a clean, named OSC surface described by one JSON file. Drive it from a live-coding client, a DAW, a script, the CLI — or from Claude via the built-in MCP server (a MIDI MCP and OSC MCP).

Install

As an MCP server — drive synths and DAWs from Claude, nothing to install:

npx -y @roomi-fields/osc-bridge mcp

As a standalone bridge / CLI:

npm install -g @roomi-fields/osc-bridge      # downloads the prebuilt binary
# or grab a binary directly from the Releases page
osc-bridge run --device devices/arturia/minilab3.json --out-port 4

MCP client config and the five tools → docs/MCP.md. Full quick-start with MIDI port discovery → § Install & quick start.

Why a bridge?

Modern synths — hardware and software alike — expose themselves over MIDI, SysEx, and OSC with proprietary, scattered protocols. Using them from live-coding environments, a DAW, a script, or an LLM is painful:

• CC / NRPN addresses are cryptic
• SysEx byte formats are hand-rolled per device
• Bidirectional state (what the device CURRENTLY knows) is hard to track

osc-bridge gives every supported synth a clean, named OSC surface:

~mb = NetAddr("127.0.0.1", 7777);
~mb.sendMsg("/minilab3/knob/3/cc_number", 64);     // reconfigure knob 3
~mb.sendMsg("/minilab3/pad/0/color", 127, 0, 0);    // pad 1 red
~mb.sendMsg("/minilab3/display/text", "Hello", "World");

Each synth is described by one JSON file. No Rust recompile required to add a device.

What makes it different

• One JSON = one driver. Adding a synth is ~30 lines of declarative JSON — CC numbers, SysEx frame templates, optional parameter tables. No Rust, no bindings, no build step. Ship a PR, osc-bridge run picks it up.
• 849 devices out of the box. Every Prophet, every Oberheim, every Yamaha DX-family, MatrixBrute, Hydrasynth, Virus TI, Digitone, Matrix-1000… most of the catalogue is usable today. Fully searchable at roomi-fields.github.io/osc-bridge.
• Hardware and software. The same named OSC surface drives a hardware synth over MIDI/SysEx or a DAW / live-coding environment over OSC — Ableton, Bitwig, Reaper, Sonic Pi, SuperCollider, Pure Data, TouchDesigner, VCV Rack. See § Software targets.
• An MCP server built in. osc-bridge mcp exposes the whole catalogue to Claude (or any MCP client) — a MIDI MCP and OSC MCP. Discover devices, read a device's OSC surface, send OSC to synths and DAWs. See docs/MCP.md.
• Honest provenance. Each device declares its source in _sources[]: ✅ hardware-verified, ✅ software-verified, 📘 vendor-doc, 📡 vendor-osc-api / 📡 third-party-osc, 🎛️ electra-preset, 📦 pencilresearch. You always know whether a mapping was tested on the device or lifted from a spec sheet.
• Bidirectional out of the box. Incoming MIDI (knob turns, SysEx replies, NRPN) is decoded and re-emitted as OSC. Multi-client fan-out is a --osc-client flag.
• N-to-N orchestration. One process can drive several synths at once (osc-bridge orchestrate --config bridge.toml), each reachable under its own OSC prefix — so two MatrixBrutes live side-by-side as /matrixbrute-1 and /matrixbrute-2.
• First-class reconfigurable controllers (Electra One MK2). Upload a generated preset as one OSC call; the bridge parses the JSON, reconfigures the device over SysEx, and dynamically rewires its own CC↔OSC routing so each knob on the new layout is reachable by name. Self-describing over OSC: /bridge/docs returns the integration guide, /electra1/routes/list returns the authoritative address table, so clients (or LLM-driven integrators) never hardcode slugification or protocol details. See § Reconfigurable controllers below.
• Escape hatch when JSON isn't enough. For devices with checksums, quirky scaling, or stateful protocols, an optional per-parameter transform / per-command script runs Lua 5.4 sandboxed (1 MiB / 10 ms caps, no os/io/loaders). Used sparingly — osc-bridge lint warns on every script use — but it lets the declarative core stay small without giving up on edge cases. See docs/scripting.md.
• Runtime you can trust. Rate-limiting per device, backpressure-aware, zero-alloc hot path, no GC. Single static binary on Windows / Linux / macOS.

Supported devices

849 devices across 187 vendors — Moog · Arturia · Novation · Korg · Sequential · Dave Smith Instruments · Roland · Yamaha · Elektron · Waldorf · Behringer · Dreadbox · Erica Synths · Polyend · Modal · Expressive E · Bastl · Chase Bliss · Make Noise · Electra One · Tasty Chips · Oberheim · Access · ASM · Black Corporation · Hologram · Strymon · Empress · Meris · Eventide · Ensoniq · Rhodes · Haken · Tubbutec · Ableton · Bitwig · Cockos (Reaper) · Sonic Pi · SuperCollider · Pure Data · TouchDesigner · VCV Rack · and ~85 more.

Status	Count	Highlight
✅ Hardware-verified (tested on the physical device — scope varies per driver, see _sources in each JSON)	4	Arturia MiniLab 3 · Electra One MK2 · Ableton Push 3 · Arturia MatrixBrute (firmware-RE partial)
✅ Software-verified (tested end-to-end against a running instance of the host software)	1	Ableton Live 12.2.7 (via AbletonOSC)
📘 Vendor-doc derived (from manufacturer programmer's references — bytes match the spec)	193	Novation Launch Control XL 3 · Polyend Synth · …
📡 OSC-API (software targets) — DAWs and live coding environments, declarative or passthrough	7	Bitwig Studio · Reaper · Sonic Pi · SuperCollider · Pure Data · TouchDesigner · VCV Rack
🎛️ Electra-preset derived (from the Electra One community preset library — covers SysEx + CC/NRPN, author's editorial choices)	398	Prophet 5/10 · Prophet 6 · OB-6 · OB-X8 · Matriarch · Hydrasynth · Virus TI · Digitone · …
📦 Pencilresearch derived (from pencilresearch/midi — CC/NRPN only)	244	Moog · Sequential · DSI · Roland · Yamaha · Waldorf · Behringer · Dreadbox · …
🚧 WIP / 📝 stub	2	GR Mega (placeholder)

Searching for your device?

• 🔎 Interactive browser → https://roomi-fields.github.io/osc-bridge/ (live search by vendor / model / author / source).
• 📄 Full catalogue as Markdown → docs/SUPPORTED_DEVICES.md (auto-generated, organised by vendor).

Your synth isn't there, or a doc-derived entry (📘 / 📡 / 🎛️ / 📦) needs promoting to ✅ after you test it on hardware? See the next section.

Share your own device

New here? The 30-minute tutorial builds a working driver end to end. Otherwise — three common cases, pick yours:

Your synth isn't listed → open a PR adding devices/<vendor>/<slug>.json.

1. Find a source: vendor programmer's reference, MIDI implementation PDF, or a canonical CSV. No source cited = PR stays open until one is provided.
2. If it's in pencilresearch/midi, run python3 scripts/import_pencilresearch.py <path-to-csv> — generates the JSON for you.
3. Otherwise copy a similar existing device from devices/ as a template and follow docs/DEVICE_JSON_SCHEMA.md.
4. Run cargo run --release -- lint <file> and cargo test --release.
5. Run python3 scripts/regen_supported_devices.py to refresh the catalogue.
6. Open the PR — GitHub shows the new_device.md template.

Your synth is listed but not yet ✅, and you have the hardware → PR promoting it to ✅. Test every route, attach the log, flip the marker. promote_to_verified.md template.

Your synth is listed but a CC is wrong / needs SysEx added → PR updating the JSON. update_device.md template. Especially welcome on pencilresearch-imported devices where SysEx needs to be layered in.

Full contributor guide (schema extensions, bug reports, Lua escape hatch) → CONTRIBUTING.md. For devices whose protocol can't be expressed declaratively, see docs/scripting.md — use sparingly; osc-bridge lint warns on every use.

Reconfigurable controllers (Electra One MK2) — the scripts stress-test

Most synths have a fixed set of controls — MiniLab 3's knobs always mean the same thing. The Electra One MK2 is different: its 216 controls are defined by a preset that you upload to the device, and the meaning of every CC changes when the preset changes. A static JSON spec can't describe that; the bridge treats it as a first-class case.

This integration is what validates the whole Lua scripting subsystem in anger. The MK2 driver exercises every feature of the scripting.rs layer on real hardware (firmware 4.1.4, verified 2026-04-14):

• Native JSON codec (ob.json_decode / ob.json_encode) — parses a full Electra preset (up to 100 KB of nested pages/devices/groups/controls/overlays) in a single Lua block, under the 500 ms preset_ingest profile.
• Persistent per-device state (ob.state) — the driver stores the active preset name so /electra1/preset/current can report it on demand.
• Dynamic CC↔OSC route registration (ob.register_cc_route / ob.clear_routes / ob.set_current_page) — every preset upload rebuilds the bridge's routing table from scratch, zero restart.
• Multi-block SysEx emission (ob.emit_sysex) — the upload script emits the wrapped SysEx preset data block directly from Lua.
• Outbound OSC emission (ob.emit_osc) — powers the introspection endpoints: /routes/list, /preset/current, /page/current.
• Reply scripts with matched bindings (ctx.bindings) — when the device reports a page switch over SysEx, a reply script updates the bridge's active page so CC routing tracks the hardware UI automatically.
• Companion markdown auto-load — devices/electra-one/electra-one.md is loaded at startup and served over /bridge/docs, so LLM-driven integrators read the device-specific quirks (hex-color requirement, inputs[{potId}] mandatory, envelope-segment cycling gesture, MIDI port selection, etc.) without any code-side knowledge.

Every item above has a unit test, an end-to-end test against the real .json driver, and a hardware-verified green light. If you're building a driver for another reconfigurable controller (Faderfox custom, programmable MIDI Fighter), the Electra driver is the template — copy its custom_commands block, adapt the JSON→routes parsing to your device's preset format, done.

What the bridge does

 Kanopi / your client                   osc-bridge                     Electra One MK2
─────────────────────                 ────────────────               ────────────────────

 /electra1/preset/upload  ───► parse preset JSON (preset_ingest
   "<preset JSON>"                profile: 500 ms / 4 MiB Lua)
                                ┌─ ob.clear_routes()
                                ├─ ob.register_cc_route × N
                                │    (one per cc7 control,
                                │     per-page, with channel)
                                └─ ob.emit_sysex(…)  ──────────► F0 00 21 45 01 01 <json> F7
                                                                          (reconfigures device)
                                                   ◄────────── F0 00 21 45 7E 01 …  ACK

 (user turns knob on page 2)                     ◄────────── B4 4A 53  (CC#74 ch5 = 83)
                             route lookup: page=2, ch=4, cc=74
                             → /electra1/page2/cutoff 0.65 ───► /electra1/page2/cutoff 0.65

 (user switches page on device)                  ◄────────── F0 00 21 45 7E 06 03 F7
                             reply.script fires:
                             ob.set_current_page(3)
                                                               ───► /electra1/page/switched 3

Discovery from zero

Every piece of device-specific knowledge is exposed over OSC — clients never hardcode slugification rules, page indexing, or SysEx opcodes:

Send	Receive
/bridge/status	One /bridge/status/device <slug> <status> per connected device
/bridge/docs	/bridge/docs/device <slug> <markdown> — full integration guide (the device's companion .md, loaded automatically)
/electra1/routes/list	N× /electra1/routes/entry <addr> <ch> <cc> <page> <min> <max> then /electra1/routes/done
/electra1/preset/current	/electra1/preset/current <name>
/electra1/page/current	/electra1/page/current <n>

An LLM-driven integrator needs exactly four steps to go from cold start to routing knob turns: /bridge/status → /bridge/docs → /electra1/preset/upload → /electra1/routes/list. Everything else is in the markdown guide embedded in the bridge itself.

Generalising to other reconfigurable controllers

The machinery (DynamicRoutes, ob.register_cc_route, ob.emit_sysex, custom_commands, companion .md auto-loading) is device-agnostic. Adding a reconfigurable Faderfox, a custom MIDI Fighter Twister layout, or any programmable controller is the same recipe: a preset-parsing Lua block inside the device JSON that calls ob.register_cc_route per control. No core changes.

Install & quick start

Prebuilt binaries

Grab the latest osc-bridge.exe (Windows), osc-bridge (Linux/macOS) from the Releases page.

From source

git clone https://github.com/roomi-fields/osc-bridge
cd osc-bridge
cargo build --release
./target/release/osc-bridge list

Minimal MiniLab 3 workflow

# 1. Find your MIDI port indices
osc-bridge list

# 2. Start the bridge
osc-bridge run --device devices/arturia/minilab3.json \
  --out-port 4 --in-port 0 \
  --bind 127.0.0.1:7777 --osc-client 127.0.0.1:8888

# 3. From another terminal, send OSC
osc-bridge osc-send /minilab3/display/text "Hello" "World"
osc-bridge osc-send /minilab3/pad/0/color 127 0 0
osc-bridge osc-send /minilab3/knob/3/cc_number 100

Incoming MIDI events (knob turns, pads played, pitch-bend, SysEx GET replies) are forwarded to --osc-client as OSC:

/minilab3/cc/18 95 0        ← knob moved
/minilab3/note/on 60 127 0
/minilab3/param/value 0 7 0 0 1   ← reply from a /param/get

Device not showing up? (Windows 11 24H2+)

Since the March 2026 cumulative update (KB5079473), Windows 11 ships Microsoft's new USBMidi2-ACX driver which enforces stricter USB descriptor checks. Devices that pass the old checks but fail the new ones appear in Device Manager with Status: Unknown, or bind to a driver that exposes them only through the new MIDI Services API — invisible to midir (and therefore to osc-bridge) which queries the legacy MME interface.

Confirmed affected: Polyend Synth / Play / Tracker / Mess / Step (VID 16D0). Likely affected: any older USB-MIDI device whose descriptor doesn't meet the new spec.

Workaround — force the legacy usbaudio driver:

1. Device Manager → Sound, video and game controllers → right-click the device → Update Driver.
2. Browse my computer for drivers → Let me pick from a list of available drivers on my computer.
3. Select USB Audio Device (FR: "Périphérique audio USB"). If not visible, uncheck "Show compatible hardware" and look under the Standard USB section.
4. Install, then unplug/replug the USB cable to force MME to re-enumerate.
5. osc-bridge list should now show the device.

Track Microsoft's progress on KB5079473 if you want a permanent fix — Pete Brown (Microsoft) acknowledged the packet-size issue publicly but classified it as non-blocking. Polyend's firmware-side fix is not announced at the time of writing.

Ergonomics

Explore a device spec without connecting anything

osc-bridge inspect devices/arturia/minilab3.json

Live-debug the OSC traffic

osc-bridge osc-listen --bind 127.0.0.1:8888

Send raw SysEx (power user)

osc-bridge osc-send /minilab3/raw/syx "F0 00 20 6B 7F 42 02 00 16 04 7F 00 00 F7"

How device JSONs work

A device file declares three things:

1. Framing — the SysEx header/footer bytes.
2. Commands — high-level OSC routes (pad colors, display text, preset recall) that build frames by substituting OSC args into placeholder templates.
3. Params — a flat table of parameter addresses for bulk GET/SET via a shared opcode.

Example snippet (devices/arturia/minilab3.json):

{
  "commands": [
    {
      "osc": "/pad/{pad}/color",
      "args": [
        {"name":"pad","type":"u7","range":[0,7]},
        {"name":"r","type":"u7"},
        {"name":"g","type":"u7"},
        {"name":"b","type":"u7"},
        {"name":"mode","type":"enum",
         "values":{"user":0,"arturia":1,"daw":2},"default":"user"}
      ],
      "pre": [{"bind":"pad_id","expr":"pad + 4"}],
      "frame": [2, "{mode}", 22, "{pad_id}", "{r}", "{g}", "{b}"]
    }
  ],
  "params": {
    "get_frame": [32, "{pr}", "{p}", "{c}", "{r}"],
    "set_frame": [33, "{pr}", "{p}", "{c}", "{r}", "{val}"],
    "value_type": "u7",
    "entries": [
      {"osc":"/global/backlight", "pr":7, "p":0, "c":0, "r":0, "range":[0,1]}
    ]
  }
}

Software targets — DAWs and live coding environments

osc-bridge isn't only for hardware synthesizers. Since version 0.10 it also treats DAWs and live-coding environments as first-class devices, behind the same /<env> OSC surface as a Prophet or a Matriarch. A driver JSON declares device.transport.kind = "osc" and the bridge forwards OSC to the target's UDP port instead of going through a MIDI cable.

Two flavors:

Declarative drivers — when the host software has a fixed, documented OSC surface (Ableton via AbletonOSC, Bitwig via DrivenByMoss, Reaper's native OSC). The driver enumerates commands[] with typed args, plus replies[] for incoming events.

Passthrough drivers — when the host software has no fixed OSC surface and each user defines their own paths in their project (Sonic Pi, SuperCollider, Pure Data, TouchDesigner, VCV Rack). The driver just declares transport.passthrough_prefix and the bridge forwards anything under /<env>/... verbatim. Replies travel the other way with the prefix added back.

Currently supported:

Target	Mode	Status
Ableton Live 12.2.7 + AbletonOSC	declarative	✅ software-verified
Bitwig Studio + DrivenByMoss	declarative	📡 third-party-osc
Reaper 7 (Default.ReaperOSC)	declarative	📡 vendor-osc-api
Sonic Pi 4.5	passthrough	📡 vendor-osc-api
SuperCollider sclang 3.13	passthrough	📡 vendor-osc-api
Pure Data 0.55-x	passthrough	📡 vendor-osc-api
TouchDesigner 2023	passthrough	📡 vendor-osc-api
VCV Rack 2.5 + community OSC plugin	passthrough	📡 third-party-osc

Each comes with a .md companion under devices/<vendor>/ that documents the required setup on the host side (Remote Script installation, ports, conventions).

Combined with osc-bridge orchestrate, you can drive a hardware MiniLab 3, an Ableton Live, and a Sonic Pi loop from a single process. With the new [[routes]] section in bridge.toml, a knob turn on the MiniLab can drive an Ableton track volume or a Sonic Pi cue, without writing any client code:

[osc]
bind = "127.0.0.1:7777"
clients = ["127.0.0.1:8888"]

[[devices]]
spec = "devices/arturia/minilab3.json"
midi_out_port = 4
midi_in_port = 0

[[routes]]
from = "/minilab3/cc/74"
to = "/ableton/track/0/volume"
map.from = [0, 127]
map.to = [0, 1]

Use from Claude via MCP

osc-bridge ships a Model Context Protocol server — a MIDI MCP and OSC MCP. Point any MCP client at it and the model can browse the 849-device catalogue, read a device's OSC surface, and send OSC to synths and DAWs.

{
  "mcpServers": {
    "osc-bridge": {
      "command": "npx",
      "args": ["-y", "@roomi-fields/osc-bridge", "mcp"]
    }
  }
}

Five tools — list_devices, get_device_docs, list_routes, send, get_status. Then in conversation: "What can the MatrixBrute do? Sweep its filter cutoff." — the model calls list_routes("matrixbrute"), then send. No glue code.

Full setup — Claude Desktop / Cursor config, the workflow, driving software targets → docs/MCP.md.

Project genesis

Started as a MatrixBrute OSC driver (patch format reverse-engineered from the GPL-3 sysex-controls and the community MBPV tool). Grew into a generic declarative bridge once the Arturia protocol family became clear.

License

GPL-3.0-or-later. Inherits GPL obligations from the sysex-controls reverse engineering that seeded our MiniLab 3 parameter table.