Rigor

Verified statistical inference for AI agents.

LLMs are decent at reciting statistics but bad at doing it reliably — a t-statistic or a required sample size is a number recalled from training data, not computed and checked. rigor is the alternative: classical hypothesis testing (parametric and non-parametric), correlation and regression, effect sizes, power/sample-size calculation, and multiple-comparisons correction, computed from scratch and returned as a cited, assumption-checked answer -- plus a decision helper for picking the right tool and a batch tool for running/ correcting many comparisons at once, since "which test do I even use" and "I forgot to correct for multiple comparisons" are their own common failure modes, distinct from getting a single formula wrong.

A concrete case where this matters. The one sample-size number everyone half-remembers is Cohen (1988)'s own worked example: d=0.5, alpha=.05, power=.80 -> n≈64 per group. It's in every textbook and slide deck, so it's also what gets pattern-matched to when a similar-looking question comes up. Ask instead for d=0.46, power=.85 -- a modest, realistic revision, not a trick:

$ rigor power ttest-2samp --effect-size 0.46 --power 0.85
Required n per group = 84.86 (round up: 85)

85, not "about 64" -- a third more participants to recruit than the half-remembered number suggests, from a question that looks like the famous one. The formula itself isn't hard (power.py runs the same bisection search either direction, in a few lines); the failure mode is that recalling a nearby-looking answer feels indistinguishable from computing the right one, right up until the number's wrong.

Built as an MCP server: a scan of the current MCP ecosystem (Context7 for coding docs, several physics/engineering/chemistry/geo servers, even Bentley's STAAD integration) found statistics/experimental design as one of the few common agent needs nobody had covered yet.

The statistics themselves (rigor/distributions.py, inference.py, nonparametric.py, correlation.py, regression.py, effect_size.py, power.py, corrections.py, plus the decision/batch helpers in advisor.py and batch.py) are pure standard library, no dependencies. The package as a whole does depend on the official mcp SDK, since the MCP server is a first-class part of what it ships, not an add-on -- see Install.

Install

pip install rigor-mcp

(the PyPI distribution is rigor-mcp since plain rigor was already taken by an unrelated package; the importable package and the CLI command are both still just rigor.) This gets you both console commands, rigor (CLI) and rigor-mcp (MCP server) -- deliberately one install, no extras to get right, since uvx rigor-mcp (how most MCP clients would actually invoke this) has no way to request an extra.

What's in it

• rigor/distributions.py — t, chi-squared, and F distributions built from scratch on stdlib (regularized incomplete gamma/beta), verified against exact closed-form identities (t(1) = Cauchy, chi2(2) = scaled exponential, t² = F(1, df)) rather than trusted transcription.
• rigor/inference.py — one-/two-sample and paired t-tests, one-/two-proportion z-tests, chi-squared goodness-of-fit and independence, Fisher's exact test (2x2, exact via the hypergeometric distribution — the small-sample alternative chi_square_independence's own low-expected-count warning points to), one-way ANOVA, and Levene's (Brown-Forsythe) test for equal variances. Each returns a TestResult: statistic, degrees of freedom, two-tailed p-value, a confidence interval, a citation, and assumption warnings (e.g. small-n normality reliance, low expected cell counts).
• rigor/nonparametric.py — Mann-Whitney U, Wilcoxon signed-rank, and Kruskal-Wallis: the non-parametric alternative to two_sample_t_test/paired_t_test/one_way_anova respectively, for when a parametric test's own assumption warnings make its result suspect. Rank-based, with tie correction; also returns TestResult.
• rigor/correlation.py — Pearson (linear) and Spearman (monotonic, via ranks) correlation, each returned as a TestResult (H0: no association) with a confidence interval via the Fisher z-transform.
• rigor/regression.py — simple (single-predictor) ordinary least squares regression: slope, intercept, R², and a significance test + CI for the slope.
• rigor/effect_size.py — Cohen's d, Hedges' g, Cohen's h, Cramér's V, eta²/omega² (for one_way_anova), and rank-biserial correlation (for mann_whitney_u).
• rigor/power.py — power and required sample size for the one-/two-sample t-test and two-proportion z-test (the one-sample formula covers paired_t_test too, since a paired t-test is a one-sample t-test on the differences). The two directions (given n, find power; given power, find n) are exact numerical inverses of each other by construction (bisection on the same underlying power function), and sanity-checked against the Cohen (1988) d=0.5/α=.05/power=.80 textbook reference case (n≈64).
• rigor/corrections.py — Bonferroni and Benjamini-Hochberg (FDR) multiple-comparisons correction.
• rigor/advisor.py — recommend_test: a decision helper, not a statistic. Answer a few characteristics of the data/question (continuous/proportion/categorical/ordinal, how many groups, paired, small-or-skewed, association-not-difference) and get back which tool to call, what to call instead if this test's assumptions look shaky, and what to run alongside it -- compiling the cross-references every other module's docstrings already carry into one callable answer, so an agent doesn't need to have already read all of them to find the relevant one.
• rigor/batch.py — pairwise_group_comparisons: runs every pairwise comparison across 2+ groups (two_sample_t_test or mann_whitney_u, your choice) and applies Bonferroni/BH correction to the whole batch in one call, instead of the agent orchestrating k*(k-1)/2 separate calls plus a correction call by hand and risking forgetting the correction step. The natural follow-up one_way_anova/kruskal_wallis already recommend in their own docstrings once a result comes back significant.
• rigor/cli.py — a CLI over all of the above (rigor.py at the repo root is a thin shim so python3 rigor.py ... also works from a plain checkout, without installing anything).
• rigor/mcp_server.py — an MCP tool wrapper exposing all 32 operations to any MCP client (Claude Code, Claude Desktop, etc.). Smoke-tested end-to-end over stdio against a real client — tool discovery plus representative calls checked against known reference values, including the full round-trip still landing the Cohen (1988) case at n=63 and Fisher's original "lady tasting tea" case at p≈0.4857.

Usage

CLI, once installed:

rigor ttest one-sample --data 5.1,4.9,5.3,5.0,4.8,5.2 --mu0 5.0
rigor corr pearson --x 1,2,3,4,5 --y 2,4,5,4,5
rigor regress --x 1,2,3,4,5 --y 3,5,7,9,11
rigor nonparam mann-whitney --a 1,2,3 --b 4,5,6
rigor power ttest-2samp --effect-size 0.5 --power 0.8
rigor recommend --outcome-type continuous --n-groups 3   # which test fits?
rigor posthoc --groups "1,2,3|4,5,6|7,8,9" --labels A,B,C  # pairwise + correction
rigor --help   # full list of subcommands (ttest, ztest, chi2, fisher, anova,
                # levene, nonparam, corr, regress, effect-size, power, correct,
                # recommend, posthoc)

or straight from a checkout without installing anything:

python3 rigor.py ttest one-sample --data 5.1,4.9,5.3,5.0,4.8,5.2 --mu0 5.0

MCP server, over stdio (the transport local clients like Claude Code expect):

pip install rigor-mcp
rigor-mcp

or from a checkout: pip install mcp && python3 -m rigor.mcp_server.

Register it with Claude Code:

claude mcp add rigor -- rigor-mcp

(or, from a checkout: claude mcp add rigor -- python3 -m rigor.mcp_server, run from this repo's root or with an absolute module path). For interactive poking with the MCP Inspector, run it as a script rather than the installed command — which means the package root has to be put on the path by hand, since the Inspector imports the file directly:

pip install "mcp[cli]"
PYTHONPATH=. mcp dev rigor/mcp_server.py

A transport-level edge case, handled

cohens_d correctly returns +inf/-inf for zero-variance samples (per its own documented contract), but non-finite floats serialize to JSON null over MCP's structured content — which used to fail the tool's own number-typed output schema and crash the call. The MCP cohens_d tool now returns {"value": float | null, "warnings": [...]} instead of a bare float, so that case is reported explicitly (null value, a warning naming the direction) rather than blowing up. That fix is specific to tools with a bare-scalar output schema — every tool that returns a dict (all the TestResult-based ones, plus simple_linear_regression) has been confirmed over real stdio to pass a non-finite field straight through as JSON's non-standard Infinity, since a generic dict return doesn't get a strict per-field number schema. Of the bare-float tools, cohens_d is the only one that can actually produce a non-finite value.

Tests

python3 -m unittest discover -s tests -v

153 tests: 140 exercise the statistics/decision logic directly; 12 spawn mcp_server.py as a real MCP client would and check results over the wire (skipped automatically if mcp isn't installed); 1 checks that server.json's version hasn't drifted from pyproject.toml's (the two aren't otherwise linked -- see test_release_metadata.py).

License

MIT — see LICENSE.

rigor MCP server