Solana Safe Sniper Mcp Template

MCP server Solana Live demo Free tier Install MCP in VS Code Install MCP in Cursor ElizaOS plugin License: MIT

🌐 Available in 9 languages: English · Español · Português · Français · Deutsch · Nederlands · 中文 · 日本語 · 한국어

Stop your AI trading agents getting rugged by coordinated wallet cabals. Drop-in template for Claude Code, Cursor, and ElizaOS.

▶ Try it now: live 3D holder map of any Solana token → — no signup.

Cabal-Hunter is a free on-chain Solana token safety scanner and rug checker. It detects coordinated wallet cabals, same-block Jito bundle buys, serial-launcher deployers and coordinated dumps on any Solana mint (pump.fun, PumpSwap, Raydium) — and answers the one question that matters before you ape: are you the exit liquidity? Use it via MCP (Claude, Cursor, ElizaOS), a REST API, or a free interactive 3D holder map.

---

The Problem

Your autonomous trading agent is reading rug.check scores, liquidity locks, and contract audits.

None of that catches a cabal.

A handful of wallets take the bottom of a launch, the chart looks clean — contract fine, LP burned, everything green — and then they sell into whoever bought after them. You are the exit liquidity.

This template integrates Cabal-Hunter as a pre-trade safety check, so your agent can see who is holding and who has already positioned to sell before it signs a swap.

A note on what we do and don't claim. This README used to open with "15 fresh wallets funded from the same master wallet, accumulating 25-40% of supply." We went looking for that pattern and could not find it. Tracing 323 pump.fun launches at the bonding curve turned up zero coordinated funding clusters, and showed why: the median launch has about five successful buyers, because on one representative token 1,260 of the curve's 1,266 transactions failed. Launch capture is a sniper race between competing bots, not a quiet cabal. The detection layers below are the ones we can actually evidence — holder concentration, same-block bundles, coordinated selling and deployer history. The pre-launch funding tracer was withdrawn; the full write-up is here.

---

The one question it answers: are YOU the exit liquidity?

The classic pump.fun exit-liquidity setup: wallets positioned before the crowd take the bottom of a launch, then dump on the retail (and bots) that pile in after. Cabal-Hunter's headline output is a single Exit-Liquidity Risk verdict (LOW | ELEVATED | HIGH) that synthesises every signal below into the only thing that matters before you sign a swap: are the insiders positioned to dump on you?

What Cabal-Hunter Does

Token mint address
      ↓
0. EXIT-LIQUIDITY RISK — the headline verdict. Synthesises the layers
   below (bundle, concentration, shared funder, coordinated dump, serial-
   rug dev) into LOW | ELEVATED | HIGH: are insiders set up to dump on
   a buyer? The one number a trading agent needs.
      ↓
1. HOLDER FUNDING LINEAGE — the CURRENT top holders walked back: were
   they seeded by the same wallet? Only System-owned accounts count as
   a funder, so pools, vaults and routers can never be mistaken for a
   person (that mistake is exactly what got our pre-launch tracer
   withdrawn). Every cluster carries evidence_txs[] — the actual
   funding transactions on Solscan. This layer is genuinely rare to
   fire; treat a hit as significant and its absence as no evidence
   either way.
      ↓
2. SAME-BLOCK BUNDLE DETECTION — holders whose token accounts were
   created in the EXACT same slot bought in one Jito bundle. Catches
   stealth launches that route funding through intermediaries to
   evade layer 1. Returned as `time_sync: true`.
      ↓
3. COORDINATED DUMP DETECTION — ≥2 holders that SOLD a meaningful chunk
   (≥25% of their bag each) in the EXACT same block — a cabal exiting in
   real time. `coordinated_exit: true`, with sold_pct = % of supply
   dumped and the sell transactions linked. Same-slot + meaningful-size +
   distinct wallets = near-zero false positives.
      ↓
4. DEV TRACK RECORD — the creator wallet is resolved on-chain (bonding
   curve pre-graduation, pump-amm pool after — works on any age token),
   and their full launch history is pulled WITH THE PEAK MARKET CAP each
   past token hit. A dead-count alone hides a pump-and-dump: a dev whose
   tokens all died at $4k is a nobody, but one who ran a token to $728k
   then dumped it to dust has done it to holders before. Reputation:
   SERIAL_RUGGER | DEAD_ON_ARRIVAL | MIXED | PROVEN, with per-launch
   peak → now (paid tier returns the full launches[] array).
      ↓
5. CEX-NOISE FILTER — holders funded from a shared exchange or
   high-volume infra wallet are NOT a cabal. They're excluded from the
   score and surfaced transparently in filtered_clusters[], so you never
   get a false positive from people who just withdrew from Binance.
      ↓
6. HONEYPOT CHECK (Solana-native) — one RPC read of the mint account:
   is the FREEZE authority live (issuer can freeze your tokens — the
   sell-block lever)? is the MINT authority live (supply can be
   inflated)? any Token-2022 traps (transfer fees up to 100%, transfer
   hooks that block sells, permanent-delegate clawback)? On Solana a
   "honeypot" is built from these — tokens have no per-token contract
   code to audit. Returns `honeypot_risk: LOW | HIGH` +
   `freeze_authority_revoked` / `mint_authority_revoked` /
   `token2022_risks[]`.
      ↓
Returns: Cabal Score (0-100) + cluster map + deployer verdict
         + honeypot verdict + on-chain receipts + hard verdict

The deployer layer is the one cabals can't dodge: wallets rotate, deployers leave a paper trail. A response of "deployer": {"reputation": "SERIAL_RUGGER", "tokens_launched": 22, "best_peak_usd": 728432, "pump_and_dumps": 2} shows the dev's full track record before the first candle — including whether this "dead" dev has quietly run tokens to six figures and dumped them on holders before. (Honest context: most prolific pump.fun creators have high dead-token rates, so this signal is capped — it flags a token for review but never drives a HIGH verdict on its own.)

Receipts, not magic. Every cluster and red flag links to the underlying Solscan transaction (evidence_txs[], holders[].funding_tx) — verify the trail yourself instead of trusting a score.

Response in <100ms on pre-indexed tokens — every pump.fun graduation is scanned and cached automatically as it happens.

Free tier: 250 scans/month per IP. Then $0.001 USDC per scan — priced at cost (it covers the Helius RPC calls behind each live on-chain trace), paid natively on Solana. No account. No API key. No subscription.

---

Quick Start

1. Claude Code / Claude Desktop

Add to your MCP config (~/.claude/mcp.json or project .mcp.json):

{
  "mcpServers": {
    "cabal-hunter": {
      "url": "https://api.cabal-hunter.com/mcp"
    }
  }
}

That's it. Claude will now call check_cabal_risk automatically when you ask it to analyse a Solana token.

Example prompt:

"Before we buy into this token, check if there are any coordinated wallets: EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v"

Claude calls the tool, pays $0.001 USDC from your connected wallet, and returns the full analysis.

---

2. Cursor

Add to .cursor/mcp.json in your project root:

{
  "mcpServers": {
    "cabal-hunter": {
      "url": "https://api.cabal-hunter.com/mcp"
    }
  }
}

---

3. ElizaOS (with automatic x402 payment)

If you're using ElizaOS with @hugen/plugin-x402-solana, payment is handled automatically. Add to your agent config:

{
  "plugins": ["@hugen/plugin-x402-solana"],
  "mcpServers": {
    "cabal-hunter": {
      "url": "https://api.cabal-hunter.com/mcp"
    }
  }
}

Your agent will call check_cabal_risk(mintAddress) before any swap and abort if cabalScore >= 35 or isControlled === true.

---

4. Direct REST API

For headless scripts, custom bots, or any language. The first 250 calls/month are free — no key, no signup. Just call it:

curl "https://api.cabal-hunter.com/api/scan-cabal?mintAddress=YOUR_MINT_ADDRESS"

You get the full analysis back immediately, with free_queries_remaining so you always know where you stand. Machine-readable contract: /openapi.json.

Once the free tier is used up, calls are $0.001 USDC via x402 — your agent just pays, no billing setup:

Step 1 — Request analysis (get payment instructions):

curl -X POST https://api.cabal-hunter.com/api/scan-cabal \
  -H "Content-Type: application/json" \
  -d '{"mintAddress": "YOUR_MINT_ADDRESS"}'

Response (HTTP 402):

{
  "error": "payment_required",
  "payment": {
    "recipient": "ATYjZ1kWoHWhj74umGJ8wFqUeW1yeSGBbLi1UQpahPxt",
    "amount_usdc": 0.001,
    "memo_required": "ch-xxxx-xxxx-xxxx",
    "instructions": "Send 0.001 USDC with this memo, then resubmit with X-Payment-Signature header"
  }
}

Step 2 — Pay & resubmit:

curl -X POST https://api.cabal-hunter.com/api/scan-cabal \
  -H "Content-Type: application/json" \
  -H "X-Payment-Signature: YOUR_TX_SIGNATURE" \
  -d '{"mintAddress": "YOUR_MINT_ADDRESS"}'

Response (HTTP 200):

{
  "mint": "YOUR_MINT",
  "token_name": "EXAMPLE",
  "risk": "HIGH",
  "cabal_score": 72.4,
  "is_controlled": true,
  "time_sync": true,
  "verdict": "AVOID — 4 wallets bought in the EXACT same block (bundled launch), controlling 34.1% of supply. DEPLOYER ALERT: this creator has launched 14 tokens, 13 of 13 checked are dead (100%).",
  "coordinated_clusters": [
    {
      "type": "funding",
      "master_full": "FvbEKF...9RUg",
      "master_short": "FvbEKF…9RUg",
      "wallet_count": 4,
      "combined_pct": 34.1,
      "risk": "HIGH",
      "evidence_txs": ["4Y8auc5G...", "2XQx9LFv...", "AAbJ7rej..."]
    }
  ],
  "filtered_clusters": [
    {
      "funder_label": "high-volume wallet",
      "master_short": "43ViqZ…Z6iy",
      "wallet_count": 2,
      "combined_pct": 4.4
    }
  ],
  "deployer": {
    "creator": "5TbRN6...full address...",
    "creator_short": "5TbRN6…2TGC",
    "tokens_launched": 14,
    "dead": 13,
    "sampled": 13,
    "dead_pct": 100.0,
    "verdict": "SERIAL_LAUNCHER"
  },
  "holders": [
    { "rank": 1, "address": "...", "pct": 12.4, "cluster_id": 0, "funding_tx": "4Y8auc5G..." }
  ],
  "wallets_checked": 12,
  "analysis_time_ms": 487,
  "source": "real_time"
}

5. Run the MCP server locally (Docker / Node)

Fastest — no clone needed: npx cabal-hunter-mcp — the same stdio server, published to npm (cabal-hunter-mcp · npm). Or run it from this repo:

Prefer to run the connector yourself instead of hitting the hosted /mcp endpoint? This repo ships a thin stdio MCP server that exposes check_cabal_risk(mintAddress) and proxies to the Cabal-Hunter API (free tier works with no key; paid scans use x402 at call time):

# Node 18+
npm install
node server/index.mjs

# or Docker
docker build -t cabal-hunter-mcp .
docker run -i cabal-hunter-mcp

Then point any MCP client at the local command:

{
  "mcpServers": {
    "cabal-hunter": {
      "command": "node",
      "args": ["server/index.mjs"]
    }
  }
}

---

Integrate into Your Trading Logic

import requests

def is_safe_to_buy(mint_address: str, payment_sig: str) -> bool:
    """Returns True if token passes cabal check."""
    resp = requests.post(
        "https://api.cabal-hunter.com/api/scan-cabal",
        json={"mintAddress": mint_address},
        headers={"X-Payment-Signature": payment_sig}
    )
    if resp.status_code != 200:
        return False  # fail-safe: don't buy on error
    data = resp.json()
    # Block on: coordinated control, high score, bundled launch,
    # or a deployer with a history of dead tokens
    deployer_verdict = (data.get("deployer") or {}).get("verdict", "UNKNOWN")
    return (
        not data.get("is_controlled")
        and data.get("cabal_score", 100) < 35
        and not data.get("time_sync")
        and deployer_verdict not in ("SERIAL_RUGGER", "SERIAL_LAUNCHER", "POOR_TRACK_RECORD")
    )

# In your bot's buy logic:
if is_safe_to_buy(token_mint, my_payment_sig):
    execute_swap(token_mint, sol_amount)
else:
    print(f"Cabal detected — skipping {token_mint}")

---

Interactive 3D Holder Map (Free)

See exactly what the analysis found. Every real holder is a faceted crystal sized by its share of supply; wallets in the same cluster are joined by light beams, and the liquidity pool and locked supply sit apart in a wireframe vault because they cannot be sold. Drag to rotate, hover for the wallet, click through to Solscan:

https://api.cabal-hunter.com/map?mint=ANY_SOLANA_MINT

Free to view, in 9 languages. Share this URL when you catch a rug. Every crystal is clickable and links to Solscan for deep-dive research.

---

Cabal-Hunter everywhere

Same detection engine, wherever your stack lives:

• npx cabal-hunter-mcp — standalone MCP server for Claude · Cursor · VS Code · any MCP client: cabal-hunter-mcp · npm
• ElizaOS plugin: npm i elizaos-plugin-cabal-hunter — plugin-cabal-hunter · npm
• REST API + OpenAPI: api.cabal-hunter.com · /openapi.json

---

Pricing

First 250 scans every month are free — per IP, no signup, no API key.

After that, pick whatever matches how hard your bot works (priced at cost — it covers the Helius RPC behind each live on-chain trace):

Plan	Price	What you get
Unlimited ⭐	$9 USDC / month	Scan all you want — fair use: 50,000/mo, more than any bot needs
Pay as you go	$0.001 USDC / scan	Only what you use — prepaid or per-call, no commitment

Prepaid keys: send USDC once → POST /api/buy-key with the tx signature → use header X-API-Key on every scan. Or pay per-call via x402 (X-Payment-Signature header). No credit card, no account, no lock-in.

Does it pay for itself? Work it out with your own numbers rather than ours: the Unlimited tier is $9 a month, so it pays for itself the first time it keeps you out of a position bigger than $9 that goes to zero. Whether that happens once a month or once a week depends on what you trade and how often — we are not going to invent an average for you.

Payment is native on Solana — no credit card, no account, no subscription lock-in.

---

Live dashboard badge

Drop a live safety badge into your own bot's dashboard — two lines of HTML, and every token shows its verdict as it trades:

<div class="cabal-hunter-badge" data-mint="YOUR_TOKEN_MINT"></div>
<script src="https://api.cabal-hunter.com/widget.js" defer></script>

It renders the 0–100 score, the plain-English verdict, and the active flags (bundled launch, coordinated dump, whale concentration, serial-launcher deployer, honeypot). Add data-refresh="120" to re-scan live as you trade, and data-api-key="..." once you're past your free scans. Works anywhere — React, plain HTML, any site.

---

API Reference

Endpoint	Description	Auth
POST /api/scan-cabal	Full cabal analysis	$0.001 USDC
GET /api/scan-cabal?mintAddress=	GET version	$0.001 USDC
GET /map?mint=	Interactive 3D holder map	Free
GET /api/cex-funding?mint=	Per-exchange funding breakdown (which CEXes funded holders, % each)	Free
GET /api/trade-analysis?mint=	Cohort PnL (Team/Snipers/Insiders) + wash-trading score + exit-liquidity price impact, one call	Free
POST /api/watch	Register an emergency dump webhook for a mint (push on dump/rug start)	Free
GET /api/info	Pricing, endpoints	Free

Emergency dump webhook (auto-exit)

Instead of polling, let your bot subscribe to a token it holds — we push the moment a coordinated dump or liquidity drain starts:

curl -X POST https://api.cabal-hunter.com/api/watch \
  -H "Content-Type: application/json" \
  -d '{"mint":"YOUR_MINT","webhook_url":"https://your-bot.com/dump-alert"}'

Your endpoint receives:

{ "event":"dump_detected", "mint":"...", "reason":"price −34% since last check",
  "coordinated": true, "price_usd": 0.0001, "liquidity_usd": 4200,
  "action":"consider_immediate_exit", "ts": 1781370000 }

| GET /health | Uptime check | Free | | POST /mcp | MCP tool endpoint | $0.001 USDC per call |

---

Infrastructure

• RPC: Dedicated Helius node (Frankfurt) — fastest Solana data available
• Hosting: AWS EC2 Frankfurt — low latency for EU/global
• Analysis: Real on-chain data — no scrapers, no caches of cached caches
• Uptime: 99.9% target — monitored, auto-restart via systemd

---

FAQ

What is a Solana cabal? A group of wallets — often funded from the same source and buying in the same block — that quietly accumulate a large share of a token's supply before retail, then dump simultaneously into everyone who buys after launch.

How do I check if a Solana token is a rug? Scan the mint with Cabal-Hunter (MCP, REST API, or the free 3D holder map). It traces holder funding back to shared sources, detects same-block bundle buys, flags serial-launcher deployers and live coordinated dumps, and returns an Exit-Liquidity Risk verdict: LOW, ELEVATED, or HIGH.

Is it free? Yes — 250 scans/month per IP, with no signup or API key. Beyond that it's $0.001 USDC per scan — which just covers the Helius RPC cost of the live trace — paid natively on Solana.

Can AI trading agents use it? Yes — that's the whole point. The MCP server (api.cabal-hunter.com/mcp) lets Claude, Cursor and ElizaOS agents call check_cabal_risk(mintAddress) automatically before any swap, and a REST API covers any other language.

---

License

MIT — fork it, build on it, integrate it. If you build something with this, share it.

---

Built by PF Capital · Powered by Helius · Contact: api.cabal-hunter.com/api/info