Unofficial Polestar

[!IMPORTANT] Disclaimer: This is an independent, community-built project. It is not affiliated with, associated with, endorsed by, or supported by Polestar in any way. "Polestar" is a trademark of its respective owner and is used here only to describe compatibility. This project relies on unofficial, reverse-engineered APIs that may break at any time. Use at your own risk.

MCP server for controlling your Polestar from any MCP-capable AI assistant — Claude, ChatGPT/Codex, Gemini, and others. Climate, charging, locks, location and vehicle status via natural language.

unofficial-polestar-mcp is a Model Context Protocol server that connects AI assistants to your Polestar. Ask your assistant to precondition the cabin, set charge limits, check battery and range, find where you parked, or flash the lights — all through the same cloud APIs the official app uses. Safety-critical actions (unlock, open windows) are disabled by default and require explicit confirmation. Built on the unofficial-polestar-api library. Not affiliated with Polestar.

Tools

Category	Tools
Vehicles	list_vehicles
Status	get_battery, get_location, get_exterior, get_odometer, get_health, get_availability, get_weather, wake_vehicle
Climate	get_climate, start_climate (temperature + seat/steering-wheel heating), stop_climate
Charging	get_charging_settings, set_charge_limit, set_amp_limit, start_charging, stop_charging
Locks	lock_car, unlock_car, unlock_trunk, honk_and_flash
Windows	open_windows*, close_windows

* Disabled by default. Tools that expose the vehicle (unlock, unlock trunk, open windows) are only registered when the server is started with POLESTAR_ENABLE_UNLOCK=1, and additionally ask for confirmation (confirm=true) before sending the command.

All tools carry MCP annotations: status tools are marked readOnlyHint, exposure tools destructiveHint, so MCP clients can prompt accordingly.

If your account has a single vehicle it is selected automatically; otherwise pass a vin argument or set POLESTAR_VIN.

Command pre-flight behavior

Before sending a command, the server:

• Serializes commands per vehicle — one in-flight command per car, so parallel tool calls can't race each other.
• Checks reachability — if the car is asleep it sends one wake-up and re-checks; if it's unreachable for another reason (in use, OTA update, …) the command is still sent and the result says so.
• Reads the relevant state first and includes it in the result — e.g. start_charging reports charge level and charger connection, lock_car warns if a door, hood, or tailgate is open.
• Skips already-satisfied commands — "start charging" while charging, "lock" while locked, or setting a charge limit to its current value returns "command": "skipped" with the reason instead of firing a redundant command.

State reads are best-effort: if a pre-check read fails, the command is still sent and the result carries a warning — the Polestar backend remains the final validator.

Installation

Option A: MCP bundle (easiest, Claude Desktop)

1. Install uv (the bundle uses it to fetch dependencies on first launch).
2. Download unofficial-polestar-mcp-<version>.mcpb from the latest release.
3. Double-click the file (or drag it into Claude Desktop → Settings → Extensions).
4. Enter your Polestar email and password in the extension settings — the password is stored in your OS keychain, not in a config file. Unlock/open-windows tools stay disabled unless you flip the toggle.

Option B: from source

Requires Python 3.11+.

macOS / Linux:

git clone https://github.com/<you>/unofficial-polestar-mcp
cd unofficial-polestar-mcp
python3 -m venv .venv
.venv/bin/pip install -e .

The server binary is at .venv/bin/polestar-mcp.

Windows (PowerShell):

git clone https://github.com/<you>/unofficial-polestar-mcp
cd unofficial-polestar-mcp
python -m venv .venv
.venv\Scripts\pip install -e .

The server binary is at .venv\Scripts\polestar-mcp.exe.

Configuration

The server authenticates with your Polestar account credentials via environment variables:

Variable	Required	Description
POLESTAR_EMAIL	yes	Polestar account email
POLESTAR_PASSWORD	yes	Polestar account password
POLESTAR_VIN	no	Default vehicle when the account has several
POLESTAR_TOKEN_FILE	no	Token cache path (default ~/.polestar-mcp/tokens.json)
POLESTAR_ENABLE_UNLOCK	no	Set to 1 to register the unlock_car, unlock_trunk, and open_windows tools (off by default)

Tokens are cached on disk (mode 0600 on macOS/Linux; on Windows the file inherits your user profile's ACLs) so restarts reuse the refresh token instead of re-running the full login.

Client setup

This is a standard stdio MCP server — it works with any MCP-capable client and is not tied to a specific AI provider.

Claude Desktop (macOS / Windows)

Add to your Claude Desktop config file:

• macOS: ~/Library/Application Support/Claude/claude_desktop_config.json
• Windows: %APPDATA%\Claude\claude_desktop_config.json

{
  "mcpServers": {
    "polestar": {
      "command": "/path/to/unofficial-polestar-mcp/.venv/bin/polestar-mcp",
      "env": {
        "POLESTAR_EMAIL": "[email protected]",
        "POLESTAR_PASSWORD": "your-password"
      }
    }
  }
}

On Windows, use the Scripts binary and escape backslashes in JSON:

"command": "C:\\path\\to\\unofficial-polestar-mcp\\.venv\\Scripts\\polestar-mcp.exe"

Claude Code (macOS / Linux / Windows)

claude mcp add polestar \
  -e [email protected] \
  -e POLESTAR_PASSWORD=your-password \
  -- /path/to/unofficial-polestar-mcp/.venv/bin/polestar-mcp

On Windows, point to .venv\Scripts\polestar-mcp.exe instead.

OpenAI Codex CLI

Add to ~/.codex/config.toml:

[mcp_servers.polestar]
command = "/path/to/unofficial-polestar-mcp/.venv/bin/polestar-mcp"
env = { POLESTAR_EMAIL = "[email protected]", POLESTAR_PASSWORD = "your-password" }

(ChatGPT's own connector support is limited to remote MCP servers; for local stdio servers like this one, use Codex CLI or another desktop client.)

Gemini CLI

Add to ~/.gemini/settings.json (or .gemini/settings.json in a project):

{
  "mcpServers": {
    "polestar": {
      "command": "/path/to/unofficial-polestar-mcp/.venv/bin/polestar-mcp",
      "env": {
        "POLESTAR_EMAIL": "[email protected]",
        "POLESTAR_PASSWORD": "your-password"
      }
    }
  }
}

Other MCP clients (Cursor, VS Code, Windsurf, …)

The same command + env configuration shape works for VS Code Copilot, Cursor, Windsurf, and any other MCP client.

Notes that apply to every client:

• The POLESTAR_ENABLE_UNLOCK gate is enforced by the server itself, so it protects you regardless of client or model.
• The readOnlyHint/destructiveHint tool annotations are hints — clients differ in whether they surface them. Keep per-tool confirmation enabled and avoid auto-approve/YOLO modes with this server.

Example prompts

• "How charged is my Polestar and what's the range?"
• "Precondition the car to 21° and turn on the driver's seat heater."
• "Set the charge limit to 80% and start charging now."
• "Where did I park?"
• "Flash the lights, I can't find the car."

Safety & disclaimer

• Exposure tools are opt-in. unlock_car, unlock_trunk, and open_windows are not available at all unless you start the server with POLESTAR_ENABLE_UNLOCK=1. This is an environment-level switch that a prompt-injected model cannot flip.
• Do not blanket-auto-approve this server's tools in your MCP client. The in-tool confirm=true step is a courtesy prompt for the model, not a security boundary — anything the model reads (web pages, emails, documents) could try to talk it into passing confirm=true. Your client's per-call tool approval is the real gate for destructive actions; the tools are annotated (readOnlyHint/destructiveHint) so clients can distinguish safe reads from vehicle commands.
• Vehicle data returned by tools (location, VIN, registration) enters the model context and is processed under your AI provider's data policy — whichever assistant you connect (Claude, ChatGPT, Gemini, …).
• This project uses unofficial, reverse-engineered APIs. They can break or change at any time. Use at your own risk.
• Not affiliated with, endorsed by, or supported by Polestar.

License

MIT