Venus Os

MCP (Model Context Protocol) server for Victron Venus OS management. Provides tools for reading and controlling Venus OS devices via D-Bus and MQTT.

Features

• D-Bus Read Tools: Battery SoC, PV power, grid status, inverter state
• Write Tools: Set inverter mode, charge limits, SoC limits (with safety confirmation)
• MQTT Subscription: Real-time data streaming from Venus OS
• Safety Constraints: Refuses dangerous commands without explicit confirmation
• Claude Desktop Integration: Ready-to-use MCP server configuration

Quick Start

Installation

Not yet on PyPI. Install from GitHub:

pip install git+https://github.com/4alvit/mcp-venus-os

Or for development:

git clone https://github.com/4alvit/mcp-venus-os
cd mcp-venus-os
uv sync

Configuration

Create a .env file or set environment variables:

# D-Bus configuration
DBUS_BUS_TYPE=system
DBUS_SERVICE_NAME=com.victronenergy

# MQTT configuration
MQTT_HOST=localhost
MQTT_PORT=1883
MQTT_BASE_TOPIC=N/venus-os

# Safety configuration
SAFETY_REQUIRE_CONFIRMATION=true
SAFETY_MAX_CHARGE_CURRENT=100
SAFETY_MAX_DISCHARGE_CURRENT=100
SAFETY_MIN_SOC_LIMIT=10
SAFETY_MAX_SOC_LIMIT=100
SAFETY_ALLOWED_MODES=on,off,charger_only,inverter_only,eco

Running the Server

mcp-venus-os

Or with uv:

uv run mcp-venus-os

Claude Desktop Integration

Add to your claude_desktop_config.json:

{
  "mcpServers": {
    "venus-os": {
      "command": "uv",
      "args": ["--directory", "/path/to/mcp-venus-os", "run", "mcp-venus-os"],
      "env": {
        "DBUS_BUS_TYPE": "system",
        "MQTT_HOST": "localhost",
        "MQTT_PORT": "1883"
      }
    }
  }
}

Available Tools

Read Tools

Tool	Description
get_battery_soc	Get battery state of charge, voltage, current, power, temperature
get_pv_power	Get PV/solar charger power, voltage, current, daily/total yield
get_grid_status	Get grid/AC power, voltage, current, frequency, status
get_inverter_status	Get inverter mode, state, AC/DC power, temperature
list_devices	List all Victron devices on D-Bus

Write Tools (Requires Confirmation)

Tool	Description
set_inverter_mode	Set inverter mode: on, off, charger_only, inverter_only, eco
set_charge_current_limit	Set maximum charge current in Amps
set_soc_limit	Set battery SoC limit percentage

MQTT Tools

Tool	Description
mqtt_connect	Connect to MQTT broker
mqtt_disconnect	Disconnect from MQTT broker
mqtt_subscribe	Subscribe to MQTT topic pattern

Safety System

All write operations require explicit confirmation by default. Set confirmed=true in the tool call to bypass the confirmation prompt.

Configuration options:

• SAFETY_REQUIRE_CONFIRMATION - Require confirmation for write operations (default: true)
• SAFETY_MAX_CHARGE_CURRENT - Maximum allowed charge current in Amps (default: 100)
• SAFETY_MAX_DISCHARGE_CURRENT - Maximum allowed discharge current in Amps (default: 100)
• SAFETY_MIN_SOC_LIMIT - Minimum allowed SoC limit % (default: 10)
• SAFETY_MAX_SOC_LIMIT - Maximum allowed SoC limit % (default: 100)
• SAFETY_ALLOWED_MODES - Comma-separated list of allowed inverter modes

Architecture

graph TD
    subgraph "Venus OS Hardware"
        VOS[Venus OS / Cerbo GX]
        DBUS[(D-Bus System Bus)]
        MQTT_BROKER[(MQTT Broker)]
    end

    subgraph "MCP Server (mcp-venus-os)"
        MCP[FastMCP Server]
        DBUS_CLIENT[D-Bus Client]
        MQTT_CLIENT[MQTT Client]
        SAFETY[Safety Validator]
        TOOLS[MCP Tools]
    end

    subgraph "Clients"
        CLAUDE[Claude Desktop]
        OTHER[Other MCP Clients]
    end

    VOS --> DBUS
    VOS --> MQTT_BROKER

    DBUS --> DBUS_CLIENT
    MQTT_BROKER --> MQTT_CLIENT

    DBUS_CLIENT --> TOOLS
    MQTT_CLIENT --> TOOLS
    SAFETY --> TOOLS

    TOOLS --> MCP
    MCP -.->|stdio/JSON-RPC| CLAUDE
    MCP -.->|stdio/JSON-RPC| OTHER

Development

# Install dev dependencies
uv sync --dev

# Run linter
uv run ruff check src/

# Run type checker
uv run mypy src/

# Run tests
uv run pytest

License

MIT License - see LICENSE file for details.