X32/M32 Server

FreeNot checked

Enables control of Behringer X32/M32 digital mixing consoles via OSC protocol for remote mixing, automated setup, and live adjustments through an AI assistant.

by guycochran

GitHub Embed

About

Enables control of Behringer X32/M32 digital mixing consoles via OSC protocol for remote mixing, automated setup, and live adjustments through an AI assistant.

README

MCP server for controlling Behringer X32/M32 digital mixing consoles via OSC protocol.

When to Use This

Remote Mixing: Control your X32/M32 from anywhere on the network
Automated Setup: Quickly configure channels for rehearsals or shows
Batch Operations: Apply settings to multiple channels at once
Documentation: Query and document current mixer settings
Troubleshooting: Check mixer state without physical access
Live Adjustments: Make quick changes during performances via AI assistant

Features

32 input channels with volume, gain, mute, solo, EQ, pan control
16 mix buses for aux sends and monitor mixes
8 FX racks with parameter control
Main/monitor output control
Direct OSC parameter access for advanced users

Installation

npm install -g x-m32-mcp-server

Or from source:

git clone https://github.com/GoBeromsu/X32-MCP.git
cd X32-MCP
npm install && npm run build

MCP Client Configuration

Claude Desktop

Add to ~/Library/Application Support/Claude/claude_desktop_config.json:

{
    "mcpServers": {
        "x32": {
            "command": "npx",
            "args": ["x-m32-mcp-server"]
        }
    }
}

Connect to Mixer

connection_connect with host="192.168.1.100" and port=10023

Available Tools (21 total)

Tool	Parameters
Connection (4)
`connection_connect`	`host`, `port`
`connection_disconnect`	-
`connection_get_info`	-
`connection_get_status`	-
Channel (8)
`channel_set_volume`	`channel`, `value`, `unit`
`channel_set_gain`	`channel`, `gain`
`channel_mute`	`channel`, `muted`
`channel_solo`	`channel`, `solo`
`channel_set_name`	`channel`, `name`
`channel_set_color`	`channel`, `color`
`channel_set_pan`	`channel`, `pan`
`channel_set_eq_band`	`channel`, `band`, `parameter`, `value`
Bus (4)
`bus_set_volume`	`bus`, `value`, `unit`
`bus_mute`	`bus`, `muted`
`bus_set_send`	`channel`, `bus`, `value`, `unit`
`bus_get_state`	`bus`
FX (3)
`fx_set_parameter`	`fx`, `parameter`, `value`
`fx_get_state`	`fx`
`fx_bypass`	`fx`, `bypass`
Main/Monitor (3)
`main_set_volume`	`value`, `unit`
`main_mute`	`muted`
`monitor_set_level`	`value`, `unit`
Low-Level (2)
`get_parameter`	`address`
`set_parameter`	`address`, `value`

Quick Tips

Unity Gain: 0 dB = 0.75 linear (neutral, no boost/cut)
Safe Start: Begin with channel at -20 dB and muted
Channel Colors: Use colors to organize (red=vocals, blue=drums, etc.)
Bus Usage: 1-4 monitors, 5-6 FX sends, 7-8 recording, 9-16 IEM/matrix
Network: X32 uses port 10023, connect to same network as computer

Parameter Reference

Common Parameters

channel: 1-32
bus: 1-16
fx: 1-8
unit: "linear" (0.0-1.0) or "db" (-90 to +10)
muted/solo/bypass: true/false
pan: -100 to +100, "L50"/"C"/"R50", or 0.0-1.0
color: "red", "green", "blue", etc. or 0-15
band: 1-4 (EQ bands)
parameter: "f" (frequency), "g" (gain), "q" (Q factor)

Value Ranges

Volume linear: 0.0-1.0 (unity = 0.75)
Volume dB: -90 to +10 (unity = 0 dB)
Gain: 0.0-1.0
FX parameter: 0.0-1.0
Channel name: max 12 characters

License

MIT

Support

https://github.com/GoBeromsu/X32-MCP

from github.com/guycochran/X32-MCP

Install X32/M32 Server in Claude Desktop, Claude Code & Cursor

Recommended · one command, every IDE

unyly install x32-m32-mcp-server

Installs into Claude Desktop, Claude Code, Cursor & VS Code — handles npx, uvx and build-from-source repos for you.

First time? Get the CLI: curl -fsSL https://unyly.org/install | sh

Or configure manually

Run in your terminal:

claude mcp add x32-m32-mcp-server -- npx -y x-m32-mcp-server

FAQ

Is X32/M32 Server MCP free?

Yes, X32/M32 Server MCP is free — one-click install via Unyly at no cost.

Does X32/M32 Server need an API key?

No, X32/M32 Server runs without API keys or environment variables.

Is X32/M32 Server hosted or self-hosted?

A hosted option is available: Unyly runs the server in the cloud, no local setup required.

How do I install X32/M32 Server in Claude Desktop, Claude Code or Cursor?

Open X32/M32 Server on unyly.org, pick your client tab (Claude Desktop, Claude Code, Cursor) and press Install — the config is generated automatically, no JSON editing.

Related MCPs

Fetch

Web content fetching and conversion for efficient LLM usage.

by Community

AWS KB Retrieval

Retrieval from AWS Knowledge Base using Bedrock Agent Runtime.

by modelcontextprotocol

Spring AI MCP Server

Provides auto-configuration for setting up an MCP server in Spring Boot applications.